Volkswagen Workshop Service and Repair Manuals

-

Remove E-box bracket - 2 - from vehicle.

Installing:

Install in reverse order of removal, noting the following:

-

Tighten the screws and nuts to the tightening specifications. Refer to => [ E-Box on Left Side of Engine Compartment Tightening Specifications,
Through 10.08 ] See: Specifications/E-Box on Left Side of Engine Compartment Tightening Specifications, Through 10.08.

-

Place cover - 2 - onto E-box and slide securing bracket -  1 - in - direction of arrow - until cover -  2 - is engaged.

‹› Then check whether cover - 2 - of E-box is correctly engaged.