Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Flywheel: Service and Repair
Dual Mass Flywheel
Dual Mass Flywheel
Special tools, testers and auxiliary items required
‹› Flywheel Retainer (3067)
Removing
-
Remove the transmission.
To prevent damage to the dual mass flywheel when removing, the bolts - B - must not be removed using an air-powered or impact wrench.
Only removing the bolts by hand is permitted.
-
Rotate the dual mass flywheel - A - so that the bolts - B - are centered in the holes - arrows -.
-
When removing the bolts - B -, make sure the bolt head does not come into contact with the dual mass flywheel - arrows - or the flywheel could
be damaged when removing the bolt.
-
Install the flywheel retainer (3067) into hole in the cylinder block - B -.