Eos (1F7) V6-3.2L (BUB) (2008)
Convertible Top Deck Lid: Removal and Replacement
Rear Shelf
Rear Shelf
Removing
-
Open roof with convertible top operating button until rear lid with rear shelf tips back.
-
Bring the rear lid into its service position. Refer to => [ Rear Lid Service Position ] See: Procedures.
-
Unclip cables on bottom side of covers from relay pulleys. Refer to => [ Cover Flaps ] See: Service and Repair/Removal and Replacement/Cover
Flaps.
-
Mark the position of the screws - 4 -.
-
Note the exact measurement between the rear stop buffers on the frame - 3 -.
-
Remove the bolts - 4 -.
-
Remove the rear shelf - 1 - from the frame - 3 - with a second technician.
Installing