Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-2313002.png)
-
Remove the upper A-pillar trim.
-
Remove the windshield frame seal - 1 - from the A-pillar flange - 2 - - arrow a - and from the side retaining tabs - 3 - - arrow b -.
-
Remove the windshield frame seal - 1 - from the upper retaining strip - 6 - - arrow c -.
-
Loosen the seal - 1 - from the adhesive sealant - 5 - or double-sided tape - 5 - on the windshield frame - 4 -.
