Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-2314003.png)
-
Press the seal - 1 - into the upper retaining strip - 6 - - arrow c -.
-
Press the seal - 1 - into the side retaining strips - 3 - - arrow b - and onto the A-pillar flange - 2 - - arrow a -.
-
Make sure the seal is seated securely in the retaining strips.
NOTE: The adhesive surface of the seal forms the strongest bond the first time it is applied. The bond is no longer guaranteed if the seal is
removed again.
