Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-2315002.png)
^
Mark the forward hole to be cut on outer door seal 80 cm. from the top.
^
Mark the rearward hole to be cut on outer door seal 80 cm. from the top.
^
The gap from the edge of the hole to upper edge of outer door seal should be 2-3 mm.
^
To assist in cutting of the hole, place bone tool Part No. RMCP101 between door panel and seal.
