Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-2327003.png)
With special tool Part No: VAS 6365, Hinge Supports -arrow-, place roof in the service position shown.
Place support VAS 6365 in upper position
Open roof with Convertible Top Operation Switch -E137- until it is just before the position shown
Place support VAS 6365 in mounting hole in main
hinge
Switch ignition off, roof lowers in stages until
supports are resting on longmembers
Header Seal
Roof guide pin seals
