Eos (1F7) V6-3.2L (BUB) (2008)
Control Assembly: Diagrams
Climatronic Control Module, Multi-Pin Connector Assignments
Climatronic Control Module, Multi-Pin Connector Assignments
Special tools, testers and auxiliary items required
-
Test Box 105 Pin VAG 1598/42
-
Test Adapter VAG 1598/47
-
Template VAG 1598/47-2
20-Pin electrical connection, connector housing - A -, in wiring diagram T20c
1
-
Sunlight Photo Sensor 2 G134 or Sunlight Photo Sensor G107, signal
2
-
High Pressure Sensor G65
3
-
Sunlight Photo Sensor 2 G134 or Sunlight Photo Sensor G107, signal
5
-
CAN-High
6
-
CAN-Low
9
-
+ 5V for Sunlight Photo Sensor 2 G134 or Sunlight Photo Sensor G107
10
-
Driver Heated Seat Adjuster E94 (optional)
11
-
Front Passenger Heated Seat Adjuster E95 (optional)
12
-
Terminal 75 (optional)
13
-
Left Vent Temperature Sensor G150
14
-
Right Vent Temperature Sensor G151
16
-
Terminal 30a/ terminal 15
17
-
Signal Ground (GND) for Sunlight Photo Sensor G107, Sunlight Photo Sensor 2 G134, Left Vent Temperature Sensor G150 and Right Vent
Temperature Sensor G151
18
-
A/C Compressor Regulator Valve N280
19
-
Terminal 31
20
-
Terminal 30a/ terminal 15
16-Pin electrical connection, connector housing - B -, in wiring diagram T16g
1
-
+5V for control motors
2
-
Left Temperature Door Potentiometer/Actuator G220
3
-
Right Temperature Door Potentiometer/Actuator G221
4
-
Defroster Door Motor Position Sensor G135
5
-
Central Door Motor Position Sensor G112
6
-
Recirculation Door Motor Position Sensor G143
7
-
Back Pressure Door Motor Position Sensor G113