Eos (1F7) V6-3.2L (BUB) (2008)
Air Injection Pump: Service and Repair
Secondary Air Injection Pump Motor (BUB)
Removing
-
Disconnect secondary air hose at position indicated by - arrow -.
-
Free up the air hose leading to the Secondary Air Injection (AIR) Pump Motor V101.
-
Remove the center noise insulation.
-
Free up coolant hose at bottom on fan shroud.
-
Disconnect electrical connector - 3 - at Secondary Air Injection (AIR) Pump Motor V101 and free up electrical wiring.
-
On vehicles with DSG, remove coolant pipe bracket - 2 - to transmission oil cooler.
-
Remove bolts - 1 -.
-
Loosen bolt - 4 - and remove Secondary Air Injection (AIR) pump with bracket.
Installing
Installation is performed in reverse order.