Eos (1F7) V6-3.2L (BUB) (2008)
-
Remove the roof pillar. Refer to => [ Roof Pillar ] See: Body and Frame/Roof and Associated Components/Convertible Top/Service and
Repair/Removal and Replacement/Roof Pillar.
-
Remove the bolt - 2 - and the sensor - 1 - from the locking mechanism.
When replacing sensor, disconnect wire - 3 - at connector - 4 -.
Tightening specification for screw - 2 -: 3 Nm.
Rear Window Frame Lock Sensors
Rear Window Frame Lock Sensors