Eos (1F7) V6-3.2L (BUB) (2008)
Alternator Pulley: Service and Repair
Ribbed Belt Pulley Without Freewheel
Ribbed Belt Pulley Without Freewheel
Special tools, testers and auxiliary items required
-
Socket VAS 3310
-
Torque wrench V.A.G 1332
Removing
-
Remove generator.
-
Tighten the generator in a vise at the attachment points.
-
Use socket insert VAS 3310 to unscrew mounting nut (65 Nm) of overrunning clutch pulley from generator shaft.
Installing
Install in reverse order of removal, noting the following:
-
Tighten all threaded connections using the specified torques.