Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1067001.png)
Transmission Mount: Service and Repair
Transmission and Mount Tightening Specifications
M12 - 80 Nm
‹› If socket SW 18 (T10179) is used: 65 Nm.
M10 - 40 Nm
- Arrows Point to Alignment Pins
-
Replace all left transmission mount bolts.
-
Install all new bolts by hand.
-
Tighten bracket - A - bolts- 1 - to transmission to 40 Nm with an additional 90° turn.
