Eurovan MV V6-2.8L (AXK) (2002)
-
Switch printer on via the PRINT button (indicator lamp in button lights up).
-
Press button -1- to select "Rapid data transfer" operating mode 1.
Indicated on display:
Rapid data transfer
HELP
Enter address word XX
-
Press buttons -1- and 9- to input address word 19 "Gateway".
Indicated on display:
Rapid data transfer
Q
19 - Gateway CAN-Bus
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
Q
Scan tool sends address word 19
Indicated on display:
6N0909901 Gateway K <-> CAN 0001 ->
Coding 00002 WSC 00000
Upper line
ID no. of
Control module,
System identification
(Gateway K <-> CAN)2),
Version number
Bottom line
Coding number 1),
Work Shop Code
1) depends on control modules connected to CAN-Bus
2) CAN-Bus On Board Diagnostic (OBD) interface -J533- in instrument cluster is designated as 'Gateway' in On Board Diagnostic (OBD).
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Pressing the HELP button will print out an overview of all of the possible functions.
Available functions
01 -
Check Control Module Versions
02 -
Check DTC Memory
05 -
Erase DTC Memory
06 -
End Output
07 -
Code control module
08 -
Read measuring value block
NOTE:
-
All possible "Gateway" OBD functions are indicated above. Do not attempt to select additional functions printed out via the HELP button.
-
After function is completed, the VAG 1551 returns to the start position:
Indicated on display:
Rapid data transfer
HELP
Select function XX