Eurovan MV V6-2.8L (AXK) (2002)
-
Remove 3-pin connector -1- for Leak Detection Pump (LDP) -V144-.
-
Connect Multimeter (Fluke 83 or equivalent) between terminals 1 and 3 of Leak Detection Pump (LDP) for resistance measurement.
Specification: 640 to 720 Ohms.
-
Connect Multimeter (Fluke 83 or equivalent) between terminals 2 and 3 of Leak Detection Pump (LDP) for resistance measurement.
Specification: 14 to 18 Ohms.
If specified values are not obtained:
-
Replace Leak Detection Pump (LDP) -V144-
Checking voltage supply
Test requirement
-
All fuses must be OK.
Test sequence