Eurovan MV V6-2.8L (AXK) (2002)
/Page-765004.png)
Terminal 2 + socket 25
Wire resistance: max: 1.5 Ohms
-
Also check wires for short circuit to each other.
Terminal 3 + socket 25
Terminal 3 + socket 80
Terminal 2 + socket 80
Specification: Infinity Ohms
If no malfunctions are found in wires:
-
Replace Leak Detection Pump (LDP) -V144-
-
Perform work procedure "Procedure to follow after interruption of voltage supply":
-
Read readiness code:
-
If DTC memory was erased or the Engine Control Module (ECM) was disconnected from the continuous B+ supply, the readiness code must be
re-generated:
