volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Delivery Quantity, Checking|Page 3069 > < Delivery Quantity, Checking|Page 3067
Page 2
background image

-

Use test adapter VAS 5570 in order establish the electrical connection between the vehicle and fuel pressure sensor G247 again.

-

Connect vehicle diagnosis tester - 1 - as follows:

-

Connect diagnostic cable - 2 - to Data Link Connector (DLC) in driver footwell.

-

Switch ignition on.

-

On the following screens, select:

Vehicle Self-Diagnosis

01 - Engine Electronics

011 - Measured Values

-

Enter 140 and confirm with Q.

The current value is displayed in field 3, which the fuel pressure sensor G247 reports to the vehicle.

-

Switch digital manometer VAS 6394/1 on by quickly pressing button - A - one time.

NOTE:  Holding button - A - for 2 seconds switches on the illumination for 20 seconds.

The digital manometer VAS 6394/1 should display 0 bar; if this is not the case, then press button - C - one time quickly to set it back to zero.

Delivery Quantity, Checking|Page 3069 > < Delivery Quantity, Checking|Page 3067