GLI L4-2.0L Turbo (CCTA) (2008)
Fuel Gauge Sender: Removal and Replacement
Fuel Level Sensor
Removing
-
Read the safety precautions before beginning work. Refer to --> [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service Precautions/Vehicle Damage Warnings/Safety Precautions.
-
Observe the rules for cleanliness. Refer to --> [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service Precautions/Vehicle Damage Warnings/Clean Working Conditions.
-
Remove the fuel delivery unit. Refer to --> [ Fuel Delivery Unit ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Procedures/Fuel Delivery Unit.
Version A
-
Disengage the wire connectors - 1 through 3 - and disconnect.
-
Lift the retaining tabs - 4 and 5 - using a screwdriver and pull the fuel level sensor downward and off - arrow -.
Version B