GLI L4-2.0L Turbo (CCTA) (2008)
Seals and Gaskets: Service and Repair
Selector Shaft Lever Seal, Replacing
Selector Shaft Lever Seal, Replacing
Special tools, testers and auxiliary items required
‹› Tube (VW 423)
‹› Pulling hook (T20143)
‹› Torque wrench (V.A.G 1331)
-
Remove selector lever cable from transmission --> [ Selector Lever Cable ] See: Shift Linkage/Shift Cable/Service and Repair/Removal and
Replacement.
-
Carefully pry lever - A - from selector shaft.
-
Pry out seal using Pulling Hook (T20143/1)
-
Lightly oil new seal on outer circumference.
-
Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128).
-
Drive new seal to stop; be sure not to distort seal - arrow -.