Golf Mk3
| Removing and installing rear lid lock (estate) ► 07.95 |
| 1 - | Hexagon nut |
| q | 2 Nm |
| 2 - | Cross-head screw |
| q | 7 Nm |
| 3 - | Push button |
| q | Repairing → Chapter |
| q | Removing: |
| – | Removing rear lid trim → Chapter. |
| – | Screw out cross-head bolt → Item, unclip pull rod → Item and remove push button from lid. |
| 4 - | Handle trim |
| q | Removing: |
| – | Removing rear lid trim → Chapter. |
| – | Remove cross-head nuts → Item, unclip pull rod → Item and remove handle trim from lid. |
| 5 - | Pull rod |
| q | Hooking in, in stress-free position |
| 6 - | Rear lid lock |
| q | Installing - only with rotary latch engaged |
| 7 - | Countersunk bolt |
| q | 20 Nm |
| 8 - | Countersunk bolt |
| q | 20 Nm |
| 9 - | Striker pin |
