volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Electrical/hydraulic top > < Removing

Golf Mk3

Installing
Installing
   
–  Push the clamped section -6- of the top liner into the corner bow -4-.
–  Draw the retaining belt -5- through the top liner and the corner bow.
–  Fasten the clamping sleeves -3- on the corner bow -4-.
  N61-0024
–  Fit the top liner over the guide pin -2- at the front edge of the top and stick it in place with adhesive (D 000 801).
–  Insert rivets -1- on left and right.
–  Install cover for top catch.
–  Rivet the side securing strip onto the roof frame.
–  Stick tightening strip onto main and auxiliary bows with adhesive (D 000 801).
–  Rivet retaining belts and wind deflector onto auxiliary bow.
–  Install padding → Chapter.
  N61-0026

Electrical/hydraulic top > < Removing