volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing top liner

Golf Mk3

Removing
Removing
Remove padding ► 09.00 → Chapter.
Remove padding 10.00 ► → Chapter.
   
–  Unscrew the fixing pin on the top catch -1-.
–  Remove spreader rivet -2-.
–  Take off cover -3-.
  N61-0023
–  Remove rivet -1-.
–  Pull top liner off the guide pin -2- and off the front edge of top -3-.
–  Remove rivets for retaining belt and wind deflector from the auxiliary bow.
  N61-0026
–  Remove rivets -2- from the side fastening of the top liner.
–  Pull top liner -1- off the bows.
–  Pull the clamping sleeve -3- out of the corner bow -4- and take it off the retaining cable -5-.
–  Pull retaining cable -5- to the rear.
–  Pull the connecting wire for the heated rear window out of the top liner.
–  Pull the clamped section -6- out of the corner bow -4-.
  N61-0024
–  Unscrew the top liner -arrow- on left and right and pull the shaping wire out of the top liner.
  N61-0009

Installing > < Renewing top liner