volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Preparing new window for glazing > < Installing

Golf Mk3

Preparing old undamaged window for glazing
Preparing old undamaged window for glazing
  Note
   
When reusing an undamaged window, cut back any residual adhesive sealant -1- with the electric knife using blade -V.A.G 1561/10- with guide roller at 1 - 2 mm. Do not damage precoating or lip with spacer strip -2-.
  V64-0319
–  Do not damage spacer strip -1- or ceramic coating -2-.
  WARNING
Do not prime adhesion surfaces, do not activate and do not treat with cleaning solution. Keep dirt and grease off of bonding surfaces.
  Note
If the bonding is not carried out immediately after cutting back the remaining material, it must then be activated.
  V64-0304

Preparing new window for glazing > < Installing