Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing crankshaft >
< Loosening and tightening drive plate
Golf Mk3
Power unit
4-cylinder injection engine (2-valve), mechanics
Enginecrankshaft group, pistons
Removing and installing sealing flange and pressure plate/drive plate / moving_and_installing_drive_plate/">Removing and installing drive plate
Installing drive plate
Installing drive plate
Installing drive plate
–
Fit drive plate using packing plate with recesses
-1-
.
–
Fit new bolts
-3-
and tighten to 30 Nm.
–
Check dimension
-a-
at three points and calculate average.
Specification: 19.5…21.1 mm
If specification is not attained:
–
Remove drive plate again and fit shim
-2-
. Tighten bolts
-3-
again to 30 Nm.
–
Tighten bolts
-3-
to 60 Nm and turn 90° (1/4 turn) further (the additional 1/4 turn can be done in several stages).
Power unit
4-cylinder injection engine (2-valve), mechanics
Enginecrankshaft group, pistons
Removing and installing sealing flange and pressure plate/drive plate / moving_and_installing_drive_plate/">Removing and installing drive plate
Installing drive plate
Removing and installing crankshaft >
< Loosening and tightening drive plate