Removing and installing fuel tank, filter, and attachments
| Removing and installing fuel tank with attachments and fuel filter, front-wheel drive |
| 1 - | Cap |
| q | Renew seal if damaged |
| 2 - | Retaining ring |
| 3 - | Rubber cup |
| 4 - | O-ring |
| q | Renew if damaged |
| 5 - | Gravity valve |
| q | To remove valve unclip upwards out of filler neck |
| q | Check valve for through-flow valve vertical: open, valve tilted 45 °: closed |
| 6 - | Breather line |
| q | To activated charcoal filter |
| Engine codes AAM, ABS, ADZ, ANN, ANP → Item |
| Engine codes 2E, ADY, AGG, AKR → Item |
| q | For vehicles without activated charcoal filter system to rubber cup → Item |
| 7 - | Earth connection |
| 8 - | Breather valve |
| q | Check → Chapter. |
| q | To remove pull locking latch lightly to inside -arrow- and pull valve out |
| 9 - | Return line |
| q | Blue |
| q | From fuel rail or from injector |
| 10 - | Union nut |
| q | Remove and install using union nut tool -3217- |
| 11 - | Hose guide |
| 12 - | Flange |
| q | Note installation position on fuel tank → Chapter. |
| 13 - | Supply hose |
| 14 - | Seal |
| q | Moisten with fuel when installing |
| q | Renew if damaged |
| 15 - | Return hose |
| 16 - | Fuel delivery unit |
| q | Removing and installing → Chapter |
| q | Checking fuel pump → Chapter. |
| 17 - | Fuel gauge sender |
| 18 - | Strainer |
| 19 - | Securing strap |
| q | Note different lengths. |
| 20 - | Bracket |
| q | For securing straps |
| 21 - | 25 Nm |
| 22 - | Fuel tank |
| q | When removing, support using engine and gearbox jack -V.A.G 1383 A-. |
| 23 - | Supply line |
| q | Black |
| q | To fuel rail or to injector |
| 24 - | Fuel filter |
| q | Installation position: Arrow points in through-flow direction |
| 25 - | Retaining clamp |
| 26 - | 20 Nm |
| 27 - | Bracket |
| q | For fuel filter |
| 28 - | Rubber buffer |
| 29 - | Spring clip |
| 30 - | Spacer |
| 31 - | 10 Nm |
