Golf Mk3
| Removing and installing fuel tank with attachments and fuel filter, four-wheel drive |
| 1 - | Cap |
| q | Renew seal if damaged |
| 2 - | Retaining ring |
| 3 - | Rubber cup |
| 4 - | Earth connection |
| 5 - | O-ring |
| q | Renew if damaged |
| 6 - | Breather valve |
| q | Check → Chapter. |
| q | To remove pull locking latch lightly to inside -arrow- and pull valve out |
| 7 - | Fuel filler neck |
| 8 - | Return line |
| q | Blue |
| q | From injector |
| 9 - | Union nut |
| q | Remove and install using union nut tool -3217- |
| 10 - | Flange |
| q | Note installation position on fuel tank → Chapter. |
| 11 - | Supply hose |
| 12 - | Seal |
| q | Moisten with fuel when installing |
| q | Renew if damaged |
| 13 - | Return hose |
| 14 - | Fuel gauge sender |
| 15 - | Fuel delivery unit |
| q | Removing and installing → Chapter |
| q | Checking fuel pump → Chapter. |
| 16 - | Strainer |
| 17 - | Securing strap |
| q | Note different lengths. |
| 18 - | 25 Nm |
| 19 - | Fuel tank |
| q | Removing and installing → Chapter |
| 20 - | 20 Nm |
| 21 - | Spring clip |
| 22 - | Bracket |
| q | For fuel filter |
| 23 - | Supply line |
| q | Black |
| q | To injector |
| 24 - | Fuel filter |
| q | To remove, unclip from bracket |
| q | Installation position: Arrow points in through-flow direction |
| 25 - | Non-return valve |
| 26 - | Circlip |
| 27 - | Boot |
| 28 - | Breather line |
| q | To activated charcoal filter → Item. |
| 29 - | 10 Nm |
| 30 - | Gravity valve |
| q | To remove valve unclip upwards out of filler neck |
| q | Check valve for through-flow valve vertical: open, valve tilted 45 °: closed |
| 31 - | Spacer |
