-
‒ → First press brake pedal in direction of brake servo and hold.
- 1 - Brake pedal
- 2 - Push rod
- 3 - Mounting
-
‒ Insert special tool 3289 and pull in direction of driver's seat, when doing this counter-hold on brake pedal. (At this moment the pedal must not be allowed to move backwards). Thereby the mounting -3- retaining lugs (arrows) will be pressed off the ball head of the push rod -2-.
Note:
For ease of illustration separating the brake pedal from the brake servo is shown with the pedal cluster removed.
-
‒ Pull special tool 3289 and brake pedal together towards the driver's seat. (Thereby the brake pedal will be pulled off the ball head of the push rod).
Joining brake pedal to brake servo
|