Installing steering wheel |
–
| Fit steering wheel, screw on nut and tighten. Torque setting: 50 Nm. |
–
| Connect airbag unit connector below steering wheel. |
–
| Install trim panel below steering column. Ensure that the coil connector cable connection is located in the recess in the trim panel. |
–
| Connect connector in steering wheel to airbag unit. |
Note t
| Only use new Allen head bolts for airbag unit. |
t
| After installing the airbag steering wheel first switch on ignition, then connect battery earth strap. |
WARNING Ensure that no one is in the vehicle when connecting the battery earth strap. |
|
|
|
|