volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing power assisted steering box > < Checking delivery pressure of power steering pump V 119, Ecomatic
Running gear
Servicing power assisted steering
Removing and installing power steering pump V 119, Ecomatic
 
N48-0086

Removing

  • ‒ Disconnect battery and remove.
  • ‒ → Unbolt relay for steering hydraulics (arrow) from battery carrier.
  • ‒ Remove bolts -2- and remove battery carrier.
 
N48-0087
  • ‒ → Disconnect hydraulic pipes on pump V 119 and drain hydraulic oil.
  • ‒ Disconnect electric wires from pump V 119.
  • ‒ Unbolt pump V 119 from engine carrier and remove.

Installing

Install in reverse order.

Filling steering system with hydraulic oil

  • ‒ Fill with hydraulic oil Part No. G 002 000 up to max. mark.
  • ‒ Start engine, operate button for Ecomatic operation on wiper lever (warning lamp in combi-instrument lights up) and turn steering wheel several times onto right and left locks.
  • ‒ Check fluid level in reservoir and if necessary top-up to max. mark.

Do not reuse drained hydraulic oil!

Removing and installing power assisted steering box > < Checking delivery pressure of power steering pump V 119, Ecomatic