| Removing and installing door lock |
| Attached to the assembly carrier are window regulator, door lock and loudspeaker. |
| The door lock can be removed only together with the assembly carrier. |
| The assembly carrier, however, can only be removed if the door window is released from the window regulator. To do this, lower window to height of installation hole in assembly carrier and remove spreader pins. |
| If the door window cannot be lowered on the electric window version, first determine the cause of the fault. |
| If an electrical fault has been caused by the window regulator motor, the motor can be removed from the assembly carrier. |
|
|
|
