volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Pre-bleeding brake caliper > < Removing

Golf Mk4

Installing
Installing
The surface of the piston and seal must be cleaned only with methylated spirits and then dried.
–  Coat piston and seal thinly with assembly paste G 052 150 A2 before inserting.
   
–  Place protective seal with outer sealing lip on piston.
  N47-0079
–  Insert inner sealing lip into groove in cylinder using wedge 3409.
When doing this, hold piston in front of brake caliper.
  N47-0081
–  Screw piston into housing by turning knurled wheel clockwise.
–  To aid screwing in, use special tool 3272/1.
–  Insert brake pads.
  N46-0157

Pre-bleeding brake caliper > < Removing