Golf Mk4
Front exhaust pipe and catalytic converter with attachments, engine code AZH |
1 - | Warm air collector plate |
2 - | Lambda probe -G39- before catalytic converter, 50Nm |
q | Grease thread only with hot bolt paste -G 052 112 A3-; hot bolt paste -G 052 112 A3- must not get into the slots of the probe body |
q | Remove and install with lambda probe open ring spanner set -3337-. |
q | Checking: → Rep. Gr.24 |
3 - | 10 Nm |
4 - | 25 Nm |
5 - | 25 Nm |
q | Renew |
6 - | Connecting pipe |
q | For secondary air inlet |
7 - | Pipe union, 35 Nm |
8 - | Exhaust manifold |
9 - | Gasket |
q | Renew |
10 - | Front exhaust pipe with catalytic converter |
11 - | Lambda probe after catalytic converter -G130-, 50Nm |
q | Grease thread only with hot bolt paste -G 052 112 A3-; hot bolt paste -G 052 112 A3- must not get into the slots of the probe body |
q | Remove and install with lambda probe open ring spanner set -3337-. |
q | Checking: → Rep. Gr.24 |
12 - | 40 Nm |
q | Renew |
13 - | Gasket |
q | Renew |