t
| Loosen and tighten securing bolts and nuts for covers and housings diagonally. |
t
| Do not cant particularly sensitive parts, e.g. the valve body, and loosen or tighten diagonally in stages. |
t
| Torque settings are specified for unoiled bolts and nuts. |
t
| Threads of bolts secured with locking fluid must be cleaned with a wire brush. Then insert bolts with locking fluid -AMV 185 100 A1-. |
t
| Use a thread chaser to clear residual locking fluid from all threaded holes into which self-locking bolts are to be screwed. Otherwise there is a danger of bolts shearing when subsequently being removed. |
t
| Always renew self-locking bolts and nuts. |
t
| Always renew bolts that have to be turned further through a particular angle after tightening. |
|
|
|