| –
| Swing poly V-belt tensioning element with a 16 mm spanner in direction of arrow to slacken belt. |
| –
| Fit poly V-belt first over crankshaft belt pulley. Finally, push belt onto tensioning roller. |
| Further assembly is basically the reverse of the dismantling sequence. |
Note | t
| Ensure, before installing poly V-belt, that all ancillaries (alternator, air conditioner compressor) are secured tightly. |
| t
| When installing poly V-belt, check direction of belt rotation and proper seating of belt in pulleys. |
| After completing repairs always: |
| –
| Start engine and check that belt runs properly. |
|
|
|
