Golf Mk5
|
1 - | Dual-mass flywheel |
q | Removing and installing → Rep. gr.13 |
q | Ensure that centring pins fit tightly |
q | Contact surface for clutch lining must be free of grooves, oil and grease |
q | One-piece flywheel: from 10.10: in conjunction with 1.6 l - 66 kW turbo diesel engine and 1.6 l - 77 kW turbo diesel engine |
2 - | Clutch plate |
q | Allocation → Electronic parts catalogue (ETKA) |
q | Removing and installing → Chapter |
q | Renew only together with SAC pressure plate. |
q | Installation position: → Fig.. |
3 - | SAC pressure plate |
q | SAC means „self-adjusting clutch“ |
q | Renew only together with clutch plate. |
q | Allocation → Electronic parts catalogue (ETKA) |
q | Removing and installing → Chapter |
q | Check ends of diaphragm spring → Fig. |
q | Checking spring connections and riveted connections → Fig. |
q | Checking position of adjusting mechanism with new pressure plates only → Fig. |
4 - | M6 bolt, 13 Nm, M7 bolt, 20 Nm |
q | Allocation → Electronic parts catalogue (ETKA) |
q | Loosen or tighten diagonally in small steps |