volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Pressing in sealing flange with sender wheel > < Renewing crankshaft sealing flange - flywheel end

Golf Mk5

Pressing out sealing flange with sender wheel
Pressing out sealing flange with sender wheel
  Note
t  For the sake of clarity, the work is performed with the engine removed.
t  The procedure is identical whether the engine is installed or removed.
–  Remove flywheel.
–  Remove intermediate plate.
–  Set engine to TDC No. 1 cylinder → Chapter, Removing and installing toothed belt.
–  Remove sump → Chapter.
   
–  Remove engine speed sender -G28--arrow- using a commercially available ball-ended hex key socket.
–  Undo sealing flange securing bolts.
  Note
Sealing flange and sender wheel are pressed off the crankshaft together using three M6 x 35 mm bolts.
  N13-10021
–  Screw three M6 x 35 mm bolts into threaded holes 35 mm -arrows- of sealing flange.
–  Screw bolts alternately (maximum 1/2 turn (180 °) for each bolt) into sealing flange and press sealing flange together with sender wheel off crankshaft.
  N13-10022

Pressing in sealing flange with sender wheel > < Renewing crankshaft sealing flange - flywheel end