Golf Mk5
Assembly overview - fuel rail with injectors |
1 - | Retaining clip |
q | Ensure correct seating on injector and retaining plate. |
2 - | O-ring |
q | Renew. |
q | Before installing, moisten lightly with clean engine oil. |
3 - | Spacer sleeve |
4 - | Injector, cylinder 4 -N33- |
q | Injector, cylinder 1 -N30- |
q | Injector, cylinder 2 -N31- |
q | Injector, cylinder 3 -N32- |
q | Removing and installing → Chapter. |
5 - | Seal |
q | Renew. |
6 - | Vacuum hose |
7 - | Return line |
q | From high-pressure pump. |
q | Blue or with blue marking. |
q | Secure with spring-type clips. |
q | Check for secure seating. |
8 - | Pressure limiting valve |
q | Renew removed valve. |
q | Before installing lightly moisten O-rings with clean engine oil. |
q | Press in by hand using an 8 mm hexagon key. |
9 - | 20 Nm |
10 - | Intake manifold lower part |
Caution
|