Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing inlet side balancer shaft >
< Assembly overview - balancer shaft timing chain
Golf Mk5
Power unit
4-cylinder injection engine (1.8 and 2.0 l engine, chain drive)
Engine cylinder head, valve gear / Chain drive
Removing and installing balancer shaft module
Removing and installing balancer shaft module
Removing and installing balancer shaft module
Removing
–
Remove timing chain cover (top)
→ Chapter
.
–
Remove lower timing chain cover:
Passat CC
→ Chapter
Golf, Eos, Scirocco
→ Chapter
Tiguan
→ Chapter
–
Remove camshaft timing chain
→ Chapter
.
–
Remove guide rail for camshaft timing chain
-1-
.
–
Remove chain tensioner for camshaft timing chain
-3-
.
–
Remove chain tensioner for balance shaft timing chain
-1-
.
–
Remove tensioning rail
-2-
.
–
Remove guide rail
-3-
.
–
Remove guide rail
-4-
.
–
Remove timing chain.
Installing
l
Specified torques
→ Chapter
.
–
Turn intermediate shaft sprocket/balance shaft to markings
-arrows-
.
Note
Due to the ratio, the markings only align after every 7th turn.
–
Fit timing chain. The timing chain links with coloured markings must be positioned at the markings on the chain sprockets.
–
Fit tensioning rail for timing chain and tighten bolt
-2-
.
–
Fit guide rail for timing chain and tighten bolts
-4-
.
–
Fit guide rail for timing chain and tighten bolts
-3-
.
–
Insert chain tensioner of timing chain
-1-
with locking fluid
→ ETKA (electronic parts catalogue)
.
–
Check adjustment again.
–
Check markings on intermediate shaft sprocket/balance shaft
-arrow-
.
Note
For illustration purposes, the markings on intermediate shaft sprocket/balance shaft are shown with the chain removed.
Further assembly is basically the reverse of the dismantling sequence.
Power unit
4-cylinder injection engine (1.8 and 2.0 l engine, chain drive)
Engine cylinder head, valve gear / Chain drive
Removing and installing balancer shaft module
Removing and installing inlet side balancer shaft >
< Assembly overview - balancer shaft timing chain