Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Power unit | 4-cylinder injection engine (2.0 l engine, direct injection) | Enginecrankshaft group, pistons | Sealing flange and flywheel or drive plate | Removing and installing crankshaft sealing flange

Removing and installing crankshaft sealing flange - flywheel end

Different sealing flanges can be fitted. Allocation → ETKA (electronic parts catalogue).

Features of plate sealing flange:

t	No centring pins fitted

t	Sealing lip towards gearbox

t	Bolts shorter than in case of aluminium sealing lip

Features of aluminium sealing flange:

t	Centring pins necessary in cylinder block

t	Sealing lip towards engine

t	Bolts longer than in case of plate sealing flange

Note

t	If a plate sealing flange is installed in place of an aluminium sealing flange, pull out centring pins and use shorter bolts → ETKA (Electronic parts catalogue).

t	If an aluminium sealing flange is installed in place of a plate sealing flange, insert centring pins and use longer bolts → ETKA (Electronic parts catalogue).

Removing and installing aluminium sealing flange → Chapter.

Removing and installing plate sealing flange → Chapter.

Volkswagen Workshop Service and Repair Manuals