Golf Mk5
Assembly overview - sealing flange |
1 - | 90 Nm + 1/4 turn (90°) further |
2 - | Crankshaft toothed belt pulley |
3 - | 15 Nm |
4 - | Seal |
q | Do not additionally oil or grease the oil seal sealing lip. |
q | Renewing → Chapter. |
5 - | Sealing flange (belt pulley end) |
q | Must seat on dowel pins. |
q | Removing and installing → Chapter. |
q | Remove sump in order to remove and install. |
6 - | Cylinder block |
q | Removing and installing oil pump with balancer shaft gear assembly → Chapter. |
q | Removing and installing crankshaft → Chapter. |
q | Dismantling and assembling pistons and conrods → Chapter |
7 - | 60 Nm + 1/4 turn (90°) further |
q | Renew. |
8 - | Flywheel/drive plate |
q | Removing and installing flywheel → Chapter |
q | Removing and installing drive plate → Chapter. |
9 - | Intermediate plate |
q | Must seat on dowel sleeves. |
q | Do not damage or bend when assembling. |
10 - | Sealing flange with oil seal |
q | Renew complete only. |
q | Removing and installing → Chapter. |
11 - | Diamond-coated washer |
q | Renew. |