volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing exhaust manifold > < Assembly overview - exhaust manifold, front exhaust pipe with catalytic converters

Golf Mk5

Removing and installing Lambda probeG39 and Lambda probe 2G108
Removing and installing Lambda probe -G39- and Lambda probe 2 -G108-
Special tools and workshop equipment required
   
t  Lambda probe open ring spanner set -3337-
Removing
  W00-0206
–  Pull off cover -1- for air duct. Disengage locking clasps on side to do this.
–  Unclip air duct -2-.
  A10-1878
–  Remove air filter housing with connection hose. To do this, unscrew bolt -A-, pull off connector -B- and detach spring-type clips -C-. Note marking -D- when reinstalling.
  N24-10425
–  Separate electrical connectors -1- and -2- for Lambda probe -G39- and Lambda probe 2 -G108-.
–  Move electrical wiring to Lambda probes clear.
  N10-10167
–  Unscrew Lambda probe 2 -G108--1- and Lambda probe -G39--2-.
Installing
Installation is carried out in the reverse order. When installing, note the following:
–  On used Lambda probes, grease thread with high-temperature paste. There must be no paste on the slots of the probe body
–  Restore wiring to original position.
  A24-0761

Removing and installing exhaust manifold > < Assembly overview - exhaust manifold, front exhaust pipe with catalytic converters