Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Running gear, axles, steering | Front suspension, drive shafts | Assembly overview: drive shaft with VL107 constant velocity joint (bolt-on)

Repairing intermediate shaft

Special tools and workshop equipment required

t	Thrust plate -VW 401-

t	Thrust plate -VW 402-

t	Thrust piece -T10032-

t	Thrust piece -3118-

t	Separating device Kukko -15-2-

Pressing off bearing

–	Press bearing off intermediate shaft as shown in figure.

The jaws of theKukko splitter -15-2- must be facing shaft.

1 -	Intermediate shaft with bearing

2 -	Thrust plate -VW 402-

3 -	Thrust plate -VW 401-

4 -	Separating device Kukko -15-2-

Note

Hold shaft when pressing out.

Pressing on bearing

–	Press bearing to stop on intermediate shaft as shown in figure.

1 -	Thrust piece -T10032-

2 -	Intermediate shaft

3 -

Mounting

4 -	Thrust piece -3118-

5 -	Thrust plate -VW 401-

6 -	Separating device Kukko -15-2-

7 -	Thrust plate -VW 402-

Shoulder -arrow- of press tool -3118- must be facing bearing.

Volkswagen Workshop Service and Repair Manuals