t
| 1 = this value shows the calculated calibration value. If this value is “0”, the unit has not been calibrated. |
t
| 2 = this value is dynamic and does not give information on the state of the unit. |
t
| 3 = this value is dynamic and does not give information on the state of the unit. |
t
| 4 = this value is dynamic and does not give information on the state of the unit. |
t
| 5 = this value shows the position of the gyro compass. In the rest position the value should be “512 +/- 2”. |
t
| 6 = this value is dynamic and does not give information on the state of the unit. |
t
| 7 = this value is dynamic and does not give information on the state of the unit. |
t
| 8 = this value is dynamic and does not give information on the state of the unit. |
After selecting this menu item it can take up to 10 seconds before the test results are displayed. |
|
|
|