Golf Mk6
| Installing |
| l | If all securing screw holes are pre-drilled. |
| – | Screw in self-tapping screws -2- with cordless drill/driver -VAS 5036-, using the highest speed, until the screw bites. |
| – | It is essential that the cordless drill/driver -VAS 5036- is now removed! |
| – | Tighten screws with least possible torque so that screw is not over tightened. |
| – | Position openings on back of stone-chip protection trim -1- evenly -arrow a- over all securing screws -2- until stone-chip protection trim contacts side member -3-. |
| Use a second mechanic to ensure that all securing screws -2- remain in openings when sliding stone-chip protection trim -1-. |
| – | Slide stone-chip protection trim -1- with force against direction of travel -arrow b- onto stop. |
