volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing control unit and hydraulic unit > < Assembly overview

Golf Mk6

Connecting brake lines from tandem brake master cylinder to hydraulic unit
Connecting brake lines from tandem brake master cylinder to hydraulic unit
   
On tandem brake master cylinder:
A - Primary piston circuit of brake master cylinder to hydraulic unit.
 - Identification: Ø 6.5 mm and union nut with thread M12 x 1
B - Secondary piston circuit of brake master cylinder to hydraulic unit.
 - Identification: Ø 6.5 mm and union nut with thread M12 x 1
4 - From hydraulic unit to front right brake caliper.
  N45-10164
On hydraulic unit:
A - From hydraulic unit to primary piston circuit of brake master cylinder
 - Identification: Ø 6.5 mm and union nut with thread M12 x 1
B - From hydraulic unit to secondary piston circuit of brake master cylinder.
 - Identification: Ø 6.5 mm and union nut with thread M12 x 1
1 - From hydraulic unit to front left brake caliper.
 - Identification: Ø 5.25 mm and union nut with thread M10 x 1
2 - From hydraulic unit to rear left brake caliper
 - Identification: Ø 5.25 mm and union nut with thread M12 x 1
3 - From hydraulic unit to rear right brake caliper
 - Identification: Ø 5.25 mm and union nut with thread M10 x 1
4 - From hydraulic unit to front right brake caliper.
 - Identification: Ø 5.25 mm and union nut with thread M12 x 1
  N45-10165

Removing control unit and hydraulic unit > < Assembly overview