volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Installing

Golf Mk6

Removing circulation pumpV55
Removing circulation pump -V55-
Special tools and workshop equipment required
   
t  Hose clamps up to 25 mm Ø -3094-
  W00-0079
–  Clamp off coolant hoses using hose clamps to Ø 25 mm -3094-.
–  Loosen clip -1-.
  WARNING
Danger of scalding injuries.
When the engine is warm, the coolant temperature may be above 100 °C. The cooling system is pressurised.
If necessary, release pressure and reduce temperature before carrying out repairs.
–  Pull coolant hoses off circulation pump -V55-.
–  Pull connector off circulation pump -V55-.
–  Remove bolt -2- and remove circulation pump -V55-.
  N82-10008

Installing > < Installing