Volkswagen Workshop Service and Repair Manuals > Golf Mk6 > Heating, ventilation, air conditioning system | Auxiliary heater | Aux. heater/heater booster | Removing and installing auxiliary heater Thermo Top V

Removing and installing auxiliary heater Thermo Top V

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1410- (4…20 Nm)

t	Hose clamps up to 25 mm Ø -3094-

t	Vehicle diagnosis, testing and information system -VAS 5051B- or later model.

Note

t	There is a manufacturer's nameplate on the auxiliary heater unit. This manufacturer's plate provides information about which version is installed in vehicle, for example, diesel Thermo Top V → Fig..

t	The coolant circuit must be bled after it is opened → Chapter.

t	Cooling system is pressurized when engine is warm. If necessary, release pressure before carrying out repairs.

Volkswagen Workshop Service and Repair Manuals