Volkswagen Workshop Service and Repair Manuals

Removing and installing gearbox, Golf 2009 ► with petrol engine → Chapter „Removing gearbox“ → Chapter „Installing gearbox“

Special tools and workshop equipment required

t	Support bracket -10 - 222 A-

t	Adapter -10-222 A /8-

t	Adapter -10 - 222 A /18-

t	Adjustment plate -3282/39-

t	Support elements for gearbox (determine when setting adjustment plate on gearbox support)

t	Gearbox support -3282-

t  Shackle -T10419-

t  Shackle -10-222 A /12-

t	Engine and gearbox jack -V.A.G 1383A-

t	Engine support -3300 A-

t	Torque wrench -V.A.G 1331-

t	Torque wrench -V.A.G 1332-

t	Gearbox lifting tackle -3336- for transporting gearbox

t	Grease for clutch plate splines -G 000 100-

t	Allocate grease using → Electronic parts catalogue (ETKA).

t	2 x hexagon socket head bolt M 6 × 20

t	Flange bolt M6 x 80

t	Support -T10036 A-

t	or support -T10036-

–  If support -T10036- is used, drill 2 x Ø 7 mm holes as shown in illustration. l  Dimension -a- = 11 mm l  Dimension -b- = 98 mm l  Dimension -c- = 70 mm

At a later point, support bracket -10-222 A- will be put onto longitudinal members with adapters -10 - 222 A /8-. l  To prevent damage to edges of wings, cover bottom area of both adapters -10 - 222 A /8- with self-adhesive fabric tape -arrow- → Electronic parts catalogue (ETKA chemical substances) .