Volkswagen Workshop Service and Repair Manuals

Specified torques

Gearbox to engine

Item	Bolt	Quantity	Nm
1	M12 x 50	2	80
2	M12 x 150 t  Additionally, starter to gearbox	2	80
3	M10 x 50	3	40
4	M12 x 60	1	80
5	M6 x 8 t  Small flywheel cover plate Not fitted in all vehicles	1	10

Item -A- dowel sleeves for centring

Gearbox bracket to gearbox –  Renew bolts. –  Screw in all bolts hand-tight. –  Tighten bolts to specified torque.

Bolts -arrows-

40 Nm + 90°

Gearbox mounting to body –  Renew bolts. –  Screw in all bolts hand-tight. –  Tighten bolts to specified torque.

Bolts -arrows-

60 Nm + 90°

Gearbox support to gearbox bracket and gearbox –  Renew bolts. –  Screw in all bolts hand-tight. –  Tighten bolts to specified torque.

Bolts -arrows-

20 Nm + 90°

Drive shaft to flange shaft → Running gear, axles, steering; Rep. gr.40.