Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Balancer shaft module >
< Checking oil pressure and oil pressure switch
Golf Mk6
Power unit
4-cyl. direct injection engine (2.0 l 4V turbocharger, toothed belt drive)
Engine lubrication
Oil filter, oil pressure switch
Removing and installing oil pressure switchF1
Removing and installing oil pressure switchF1
Removing and installing oil pressure switch -F1-
Special tools and workshop equipment required
t
Jointed wrench 24 mm -T40175-
Removing
–
Remove noise insulation
→ General body repairs, exterior; Rep. gr.50
.
–
Remove left charge air pipe
-item 1 and 2-
.
–
Remove electrical connector
-1-
from retainer and pull connector
-arrow-
off oil pressure switch.
–
Unscrew oil pressure switch with 24 mm articulated wrench -T40175-
Installing
–
Insert oil pressure switch by hand and tighten to 20 Nm.
Further assembly is basically the reverse of the dismantling sequence.
Power unit
4-cyl. direct injection engine (2.0 l 4V turbocharger, toothed belt drive)
Engine lubrication
Oil filter, oil pressure switch
Removing and installing oil pressure switchF1
Balancer shaft module >
< Checking oil pressure and oil pressure switch