Note | t
| The flexible joint in the front exhaust pipe must not be bent more than 10° - otherwise it can be damaged. |
| t
| Renew seals, gaskets and self-locking nuts. |
| t
| After working on the exhaust system, ensure that the system is not under stress and that there is sufficient clearance to the bodywork. If necessary, loosen clamp and align silencers and exhaust pipe so that sufficient clearance is maintained to the bodywork at all points and the mountings are evenly loaded. |
| t
| The exhaust manifold and the turbocharger are one component, removing and installing → Chapter. |
|
|
|
